Machine Foiled Cedar Fins: Bar of Soap Twins

Tuesday October 9, 2012

bar of soap cedar fins

10" base x 4 5/8" depth--These wood surf fins are machine foiled to perfection. The cedar grain gives these fins optimum flex / stiffness. To make these easier for you to glass them on, there is one layer of glass on each side. Wood fins also have positive buoyancy, they float! The best part is that we make them here, in house.

cedar fins in production

The Tyler Warren Bar of Soap fin is designed for the small Twin fin "bar or soap board" These boards typically come in sizes 4'11" to 5'3" and are super wide and compact...Much of Tyler’s inspiration in designing the “Bar of Soap” came from his experience riding two of Richard Kenvin’s Hydrodynamica Project boards: The White Pony and Casper. Both of these boards were inspired by the hydrodynamic planing hull surfboards created by Bob Simmons 60 years ago. Check out the wood fin selection


Read More

Understanding Surf Fin Design

Tuesday October 2, 2012

surf fin design guide True Ames offers a greater diversity of fin products than any other fin company. Our material experimentations have created the True Lite Hexcore fin line, which includes thruster templates that are FCS and Futures Compatible from Lost, Erik Arakawa, Hamish Graham, Timmy Patterson, and Channel Islands. Our close relationships to imaginative pros, such as Josh Farberow, Jimmy Gamboa, Oliver Parker, Daniel Graham, Ashley Lloyd, and Brad Gerlach allows us to maintain the constant flow of feedback that will continue to establish True Ames as the industry’s greatest fin resource.

With all of the fin selection available today, sometimes it helps to really understand how fins work and what factors will change the way each individual fin will perform. Here are a few important things that could help guide your fin selection.

Construction

All surf fins are not created equal! We take advantage of a vast amount of fin manufacturing experience to create fins that work in many different applications. Designs are executed using the required materials and foils to create the highest performance surf fins available today.

Flex

Flex is a very important element in our designs. Many of our surfboard fins come with a tuned flex. A fin that has flex can be very different than a fin without flex. The flex concept brings to life an otherwise average ride. Cutbacks have more power and bottom turns have more projection.

Foils True Ames Surf Fins incorporate a constant foil which means you will not find any flat spots on our fins that may cause water disturbance which will ultimately cause poor performance. Our bigger solid color fins are foiled from 7/16” solid 6oz. glass sheet stock. Smaller fins do not need to be so thick to have the proper foil.

Size

The depth of your fin is measured from base to tip vertically. Adjusting your fin size will affect the performance of your board. Larger fins provide more stability and control, so a larger board will need bigger fins. For example a 9’6” single fin surfboard needs at least a 9.5” fin and if nose riding is most important to you then you will find bigger fins give more forward control.

Template

The outline of a fin is what determines the area and the look. The way the area is distributed on the fin is what makes fins individual and work in so many different ways. A wide base fin with a wide tip is the most stable but not forgiving. A narrow base fin with a narrow tip will be very loose and fast but unstable at slow speeds. The fin’s sweep (or rake angle) affects the board’s ability to carve turns. A more vertical fin will make tight turns and fast directional changes while a more raked fin will carve wider arcs and handle more power through turns. Tail width is also a factor in fin choice. Narrow tail boards do not require deep fins because there is less distance from the fin to the rail. A wide board requires a deeper fin than a narrower board. For example an 8’ egg style board that is on the wide side should use about an 8.5” to 9.0” fin. A narrow tail single fin board that is 7’6” can use a fin in the 7” to 8” range.


Read More


Subscribe via RSSSubscribe via RSS

site by: Citrus Media Group